Wilbur Bragg, PE
2933 Cheryl Court
Acworth, GA 30102
Mr. Bragg has a BET (civil) Georgia Southern (1979) and a BCE from Georgia Tech (1987). He is a registered engineer in Georgia and started in structural engineering at the end of 1978, working for Lindsey & Ritter, Jack Lynch & Associates and Rosser International. He has designed structures and foundations for new and renovated buildings consisting of steel, concrete, precast, masonry, and wood for institutional, commercial, educational, sports, and military projects including courthouses, detention facilities, gymnasiums, low-rise buildings, and parking decks. Mr. Bragg is a member of SEAOG, ACI (national and Georgia chapter), AISC, ICC, ASCE (national and Atlanta SEI chapter).

Michael Planer, PE
Past President
1852 Century Place
Suite 201
Atlanta, GA 30345
Michael Planer is a Principal & the Chief Operating Officer at PES Engineers, Inc. Born and raised in Atlanta, Michael obtained his BS in 1986 and his MS in 1987, in Civil Engineering (with emphasis on structural) from the Georgia Institute of Technology. He has over 20 years experience in project management, structural engineering design and consulting. His expertise focuses on the design of structural systems for industrial, commercial, retail, office, churches and educational facilities using a variety of materials including, steel, concrete, masonry, wood and tilt-up concrete.

Michael is very active in the Structural Engineering community and belongs to many organizations including ACI, ACEC/CASE, ASCE, AISC, TCA, NCEES and is a member of the Board of SEAOG and is on the Executive Committee of CASE. In addition to being registered as a Professional Structural Engineer in the state of Georgia, Michael is also licensed in New Jersey, South Carolina, Kentucky, Pennsylvania, Mississippi, Tennessee, North Carolina, Alabama, Arizona, Texas, New Hampshire, Kansas, Washington D.C., Delaware, Virginia and Utah.

Adrian Persaud, PE
1230 Peachtree St., N.E.
Suite 2500
Atlanta, GA 30309
Adrian is an Associate Principal with Uzun & Case Engineers, LLC. Adrian graduated from the Georgia Institute of Technology in 2000 with Bachelor of Science degree in Civil Engineering and from Stanford University in 2002 with a Master of Science degree in Civil Engineering in the Structures and Geomechanics program. He has over 10 years of experience in the design of commercial, institutional and educational buildings. Adrian is a registered Professional Engineer in Georgia and a member of SEAOG, AISC and ASCE.

Ken Nuttall, PE
108 Candler Oak Lane
Decatur, GA 30030
Ken is Senior Structural Engineer for Georgia State Financing and Investment Commission. His professional engineering experience also includes:
  • Design of nuclear eauipment and piping supports with Westinghouse-Offshore Power Systems.
  • Stress analysis on railroad cars and design of equipment supports for Thrall Car Manufacturing.
  • Consulting engineering with Daniel Consultants
  • Engineering for the fiber optic industry with Power Engineers 1996-2002
  • Fulton County Structural Plan Reviewer 2003-2005
  • Structural Building Plan Reviewer for the City of Sandy Springs 2005-2014.
Ken earned a BS in Civil Engineering in 1980 and a Masters of Science in Civil Engineer in 1986, both from Virginia Tech. Ken has lived in Georgia since 1987 and held several offices including President of ASCE Georgia Section in the 1990s.

Lauren McCormick, PE
1450 S. Johnson Ferry Rd
Atlanta, GA 30319
Lauren McCormick is an engineer at KSi/Structural Engineers in Atlanta, GA. She is a registered Professional Engineer in the State of Georgia. Lauren graduated from Georgia Institute of Technology with a Bachelor of Science degree in Civil Engineering in 2005 and a Master's degree in 2007. Lauren is a member of the Structural Engineers Associate of Georgia (SEAOG) and the American Society of Civil Engineers (ASCE). Her professional experience includes the design of educational, corporate, multi-family, laboratory, science and technology, and healthcare facilities utilizing concrete, steel, composite, timber and masonry construction types. Lauren is also a LEED accredited professional.

John Hann, PE
4555 Kings Abbot Way
Norcross, GA 30092
770-569-8700 johhnmichaelhann@gmail.com
John Hann is a Vice President and Senior Risk Engineer for Swiss Re Corporate Solutions. He is responsible for construction and engineering risk evaluation and assessment, underwriting support and loss control for casualty and professional lines on a global basis. John has more than thirty years of experience in the design and construction industries.

John Hann's past roles have included engagements with design firms, construction management firms, and capital project owners. His experience includes mission critical, laboratory, healthcare, commercial, industrial, municipal, environmental and transportation design and construction. John's duties have included managing and staffing single discipline firms and the design teams/departments of multi-disciplinary firms, as well as communication and coordination with clients, contractors, and design professionals, and management of capital projects. He is currently licensed as a Professional Engineer in ten states.

Eric Hagberg, PE
3581 Habersham at Northlake
Tucker, GA 30084
Eric Hagberg earned a Bachelors of Science in Civil Engineering from Lehigh University in Bethlehem, Pennsylvania. Initially pursuing a double major of architecture and engineering, Eric brings an understanding of design to his approach to structural engineering. Eric spent his early years with well-known Atlanta firms O'Kon and Company and Harald Nielsen Associates. Eric has been with Palmer Engineering Company since 1999 where he is currently Vice President and partner in the firm. His design experiences range from military aviation facilities and office buildings to adaptive reuse, historic preservation, retail, residential, signage, and renovation of many types. Eric is a member of SEAOG, NCEES and AISC. He is currently registered in Georgia and South Carolina.

Chris Lytle, PE, SE
1230 Peachtree Street
Suite 2500
Atlanta, GA 3030
Chris is a Senior Associate at Uzun+Case, LLC. Chris graduated from Georgia Tech in 2006 with a Bachelor of Science degree in Civil Engineering and followed up with a Master's in the same field in 2007. He has over 9 years of experience designing a wide variety of commercial, residential, hospitality, educational and special use facilities across the southeast and beyond. Chris has also been involved in many complex renovation projects. He is currently a registered professional engineering in Georgia and Illionois.

Albert F. Lagerstrom, PE
Executive Director
3675 Walden Lane
Acworth, GA 30102
Mr. Lagerstrom holds a Bachelor of Civil Engineering degree from Auburn University. After working with two structural engineering firms he opened his own office, Lagerstrom & Associates, Inc. in March of 1968. The firm remained in continuous operation until retirement in 2010, providing structural engineering services to architects, engineers, contractors and industry. He is an original member of SEAOG and has served in every executive committee position.